Strip Seal Expansion Joint 16mm

About Strip Seal Expansion Joint 16mm

andhya Enterprises manufacture and Supplier 0f Strip Seal Expansion Joint as per RDSO

1 M Type

2. W Type

3. F Tyoe

4 T Type

Bridge Expansion Joint Gap 40.0mm (Movement up to 80mm).Bridge Expansion Jointconsist of two edge beams with anchorages and with Neoprene sealing element held firmly in the housing of edge beams that guarantee the water tightness the joint. The maximum gap between the edge beams at the road surface when the joint fully opens due to maximum contractions of the deck shall be limited to 80mm for comfortable passage of traffic. The edge beams protects the adjacent bridge deck concrete from damage due to vehicular impact and also transfer the vehicular loads to the deck structures through robust anchorage system. Typical Bridge Expansion Joint is shown in the figure below.

Bridge Expansion Joint

Rs : / R.Mtr

GST:18% Extra

Packing and Forwording Extra

Technical Details